ATi transmitters come in a variety of input signal types as well as form factors. Whether you need to measure Torque, Temperature, Vibration or other physical measurement, ATi has a transmitter for it. If not, ask if we can design one for you. These transmitters can be installed in a Model 2010 Collar assembly (recommended) then mounted to the test specimen, housed in an enclosure or strapped on. Solder terminals are available to connect to the sensor for a ruggedized system.

Typical Transmitter Forms

Model	Type	Dimensions (inches) H x W x D	Input	Excitation
2040BC-M	Strain Gage	1.25 x 0.75 x 0.30	4-arm Wheatstone Bridge (>120 ohms)	5 Volts DC
2040BC	Strain Gage	0.85 x 1.47 x 0.68	4-arm Wheatstone Bridge (>120 ohms)	5 Volts DC
2040BC-M with RC Option*	Strain Gage	1.25 x 0.75 x 0.50	4-arm Wheatstone Bridge (>120 ohms)	5 Volts DC
2040BC with RC Option*	Strain Gage	1.10 x 1.47 x 0.68	4-arm Wheatstone Bridge (>120 ohms)	5 Volts DC
2041BC-M	Voltage	1.25 x 0.75 x 0.50	± 50mV to 10 Volts DC F.S.	5 Volts DC
2041BC	Voltage	0.85 x 1.47 x 0.68	± 50mV to 10 Volts DC F.S.	5 Volts DC
2042BC-M	Thermocouple	0.70 x 1.70 x 0.375	Type J or K Thermocouples (Specify Measurement Range)	--
2042BC	Thermocouple	0.85 x 1.47 x 0.68	Type J or K Thermocouples (Specify Measurement Range)	--
2043BC-M	Accelerometer	1.25 x 0.75 x 0.50	Compatible with most ICP type accelerometers	2 mA constant current
2043BC	Accelerometer	0.85 x 1.47 x 0.68	Compatible with most ICP type accelerometers	2 mA constant current