Battery Powered Telemetry Systems

$0.00

Description

Battery Powered Telemetry Systems

ATi’s Battery Powered Telemetry Systems are ideal for transmitting coupled data signals from sensors, which are mounted on rotating shafts or machinery to a stationary receiver.  Miniature Digital Transmitters condition and digitize sensor signals from strain gage bridge circuits, thermocouples or voltage transducers onto a RF carrier and transmit them to a stationary Digital Receiver, while the system is running. The receiver demodulates the signal and converts it to a ±2V, ±5V, ±10V or 4-20mA analog output.

Frequencies can be staggered allowing multiple transmitters to be operated in close proximity with no interference. Multiplexing transmitters and multi-channel receivers are also available.

Transmitters are small enough in size to be taped / strapped to the rotating shaft or can be used with a Collar Assembly for quicker installations.  Power to the Transmitter can be supplied by a nine-volt battery.  The Collar Assembly will clamp directly to a shaft and house the Transmitter and battery as well as house the integral transmitter antenna.

1 Channel ………………………………….. 6500 samples/sec*

2 Channels …………………………….. 3250 samples/sec/ch*

4 Channels …………………………….. 1625 samples/sec/ch*

Resolution ……………………………………………… 14 Bits*

* Other configurations (number of channels, sample rates and resolutions) are available.

Integral Non-Linearity ………………………………. ± 0.10%

Repeatability ………………………………………….. ± 0.025%

Maximum Error …………………………. < 0.15% Full Scale